Freddy coolant vacuums collect machine-tool sump sludge through a felt filter bag that hangs from the drum rim. Chips, swarf, and fines stay in the bag; the filtered coolant goes back to the machine. Replacement bags are sold mainly through UK distributors. Universal Filters makes a U.S.-built equivalent in New Jersey, sewn to your ring size and micron rating.
Replacement Bag Specifications
| Feature | Universal Filters replacement |
|---|---|
| UF part number | X-1005: 10 micron felt, 14.75″ ring, disc bottom. Other ratings and sizes are quoted to your spec. |
| Fits | Freddy coolant-recycling vacuums with a 14.75″ (375 mm) drum-rim ring. Other ring sizes made to your measurement. |
| Ring | 14.75″ OD galvanized steel wire ring sewn into a felt collar that seats on the drum lip under the lid gasket |
| Depth | About 14.75″ (375 mm), matching the original. Shorter or longer on request. |
| Bottom | Round sewn-in disc (original style), or a slightly longer bag with a flat-stitched bottom that lies across the basket floor |
| Media | Polyester needle felt, 1–200 micron, or nylon monofilament mesh, 35–800 micron, for coarse chip separation |
| Construction | Single sewn side seam, bonded polyester thread |
| Quantities | Single cartons through production runs; repeat orders run to the same spec every time |
Choosing a Micron Rating
The right rating depends on what you machine and how clean the coolant has to come back. Finer bags capture more but load faster, so you change them more often.
- Grinding and finish-critical work: 10–25 micron felt keeps abrasive fines and grinding swarf out of the coolant.
- General machining: 50–100 micron felt balances clarity against bag life.
- Heavy chip loads: 200 micron felt, or mesh, when you mainly want chips out and need fast flow.
Thick coolants and heavy sludge load bags faster than clean water-soluble coolant. If tramp oil is the bigger problem, see our tramp oil removal guide. For how ratings are measured, see the micron ratings guide.
Why a Steel Ring
The original bag uses a brass-colored ring. Ours is galvanized steel wire, the same material as the rings on our standard liquid filter bags, formed to 14.75″ and sewn into the felt collar. It holds its shape on the drum lip and seals under the lid gasket the same way.
What to Send for a Quote
- The outside diameter of the ring on your current bag, and the bag’s depth
- Disc bottom or flat-stitched bottom
- Micron rating (or what you machine, and we’ll suggest one)
- Quantity, and roughly how many you use in a year
- A photo of your current bag, if you have one
First orders take a few weeks because the ring is formed to size. Repeat orders ship faster.
Quote a Freddy replacement bag (UF X-1005): 800-554-8555 or request a quote. More one-off builds: custom filter bags and metalworking filtration.
Freddy is a trademark of its owner. Universal Filters is not affiliated with or endorsed by the maker of Freddy vacuums; these are Universal Filters–made replacement bags, and the name is used only to identify the equipment they fit.