Universal Filters manufactures replacement filter bags for liquid filtration in every standard industry size and micron rating — and in custom configurations when standard doesn’t fit. All bags are made in our New Jersey plant and fit standard bag filter housings from Eaton, Rosedale, Filter Specialists (FSI), Parker, Cuno/3M, Hayward, and others.
Filter Bag Types
- Felt filter bags — depth filtration, 1–200 micron, polyester / polypropylene / Nomex
- Mesh filter bags — NMO nylon monofilament and polyester mesh, 35–800 micron, reusable
- Welded filter bags — ultrasonic seams, zero needle-hole bypass, silicone-free
- High efficiency filter bags — layered microfiber for critical applications
- Oil-absorbing filter bags — tramp oil and hydrocarbon removal
- Tie-on filter bags — for housings and standpipes without a ring seat
- Custom filter bags — your dimensions, your hardware, your media
Standard Sizes
| Size | Dimensions (dia. × length) | Typical flow* | Bottom |
|---|---|---|---|
| Size 1 | 7″ × 16.5″ | up to ~90 GPM | Sewn or welded, flat |
| Size 2 | 7″ × 32″ | up to ~180 GPM | Sewn or welded, flat |
| Size 3 | 4″ × 8″ | up to ~25 GPM | Point |
| Size 4 | 4″ × 14″ | up to ~45 GPM | Point |
*Water at low viscosity; actual flow depends on micron rating, media, and solids load. See the sizing guide.
Larger and non-standard sizes (through 8.5″ × 32″) are available — see custom filter bags.
Ring and Top Options
Galvanized steel, stainless steel, polypropylene, and nylon rings; plastic snap-seal flanges (P and F style); Parker C-band and Cuno-style tops; drawstring and blank tops. Handles, pull tabs, and FDA-grade media available on any bag. If your housing takes it, we build it.
Have a part number — ours or anyone else’s? See the filter bag cross-reference guide, call 800-554-8555, or request a quote and we’ll cross it.