Filter Bag Pressure Drop Calculator

Estimate the clean pressure drop through your filter bags, check flow per bag, and see how many bags of each size it takes to stay inside good-practice limits. Enter your flow and fluid viscosity, pick the media and micron rating, and the numbers update as you type.

Request a quote

How the Calculation Works

This is the standard bag-filter method used across the industry. Clean bag pressure drop rises in straight proportion to flow, so it starts from a reference figure for one #2 bag (7″×32″) in water at 68°F, then scales by:

  1. Flow per bag — total flow divided by the number of bags in parallel.
  2. Bag size — smaller bags have less filter area, so the same flow produces more pressure drop.
  3. Viscosity — thicker fluids raise pressure drop roughly in proportion to viscosity.
Media Micron rating psi per 100 GPM (#2 bag, water)
Felt, mesh & POXL 1–3 0.09
5–15 0.04
25–50 0.03
75–150 0.02
200 and up 0.01
High efficiency (POMB / POMA / POMX) 0.5–3 0.93
5–8 0.48
10–20 0.31
25 and up 0.22
Bag size #1 #2 #3 #4
Multiply by 2.25 1.0 9.0 4.5
Viscosity (cP) 50 100 200 400 800 1,000 2,000 4,000 10,000
Multiply by 4.5 8.3 16.6 27.7 50 56.2 113.6 161 430

Worked example: 80 GPM of a 50 cP fluid through one #1 bag of 25 µm felt: 0.03 × (80 ÷ 100) × 2.25 × 4.5 ≈ 0.24 psi clean. The full tables are on our filter bag sizes spec sheet (PDF).

Reading the Results

  • Keep the clean system under 2 psi (bag plus housing). The lower you start, the more dirt a bag holds before it has to come out. With light dirt loads, up to 3 psi is acceptable.
  • Change bags at about 15 PSID. Running far past that risks bag rupture and pushes captured particles through the media.
  • Flow per bag has its own ceiling — roughly 90, 180, 25 and 45 GPM for sizes 1–4 in clean water — even when pressure drop looks fine.
  • Housing pressure drop isn’t modeled. Every housing is different; enter your housing maker’s clean figure if you have it.

What the Calculator Can’t Tell You

These are clean-bag estimates. Real pressure drop varies with media lot, fluid and temperature, and it climbs as the bag loads, so how fast it climbs depends on your solids. Oil Magnet® bags are sized by oil load as well as flow, so we size those with you directly (see the tramp oil removal guide). For the rest of the sizing picture (micron rating, media and change-out), see the filter bag sizing guide and filter bag sizes.

Want us to check your numbers? Send your flow, fluid, temperature and target clarity — quote form or 800-554-8555.